How To Change An Oil Filter

Setup

Put vehicle in park or in gear, apply the handbrake, and chock the wheels. This must be on a firm, level surface. Grass is not stable.

Add together engine flush

Before breaking out the tools, open the oil filler cap and empty the contents of the engine oil flush into the motor.

At present run the engine for the time recommended by the engine oil affluent. In one case the motor is turned off, you lot may wish to allow it to cool simply a little earlier commencing.

Lift the car onto stands

Using a trolley jack and beam stands, raise the vehicle to a comfy working height and place the axle stands nether the chassis supports as per manufactuer requirements.

Then lower the motorcar onto the axle stand up to support the weight. Check the car is stable and not on the trolley jack before going underneath the vehicle.

Remove any splash guards that may exist in the way - and locate the engine oil sump plug. Sure vehicles have the sump plug and transmission drain plug very most to each other, then bank check which is which against a workshop manual if necessary.

Drain oil

Fit a pair of gloves to protect your hands confronting engine oestrus and oil, and position a bleed pan underneath the plug.

Loosen it off with the appropriate size socket or spanner and apace remove the plug with your fingers and attempt not to drop information technology into the drain pan.

While y'all permit the engine oil to drain, clean up the sump plug and fit a new washer. This may exist fibre or copper depending on your vehicle.

Oil filter removal

If you have a second drain pan, you can likewise remove the oil filter while the engine oil drains. The oil filter may be hands accessible from underneath the vehicle, or through the engine bay.

Make certain you're ready to catch the substantial amount of oil which may spill from around hither. Brand sure the onetime O ring has come off with your old oil filter.

Installing filter & sump plug

Utilize a touch of clean engine oil to the oil filter o ring. This is to prevent information technology bounden upwardly on awarding. Wipe the expanse around the filter housing clean of old engine oil.

Install the new oil filter on as per filter requirements. Your final stride underneath the vehicle is replacing the sump plug. Tighten this to specification and supplant any splash guards removed – so the vehicle may be lowered back down.

Top upwardly with oil

Position a funnel and fill the sump until the oil level registers "full" on the dipstick. Replace the oil cap, starting time the engine and let information technology to run for almost one minute.

This will make full the oil filter and circulate around the engine. Now you demand to bank check the oil level again - only permit the engine to sit for a couple of minutes to reach an authentic measure. Summit up the oil if needed - and keep checking until the oil level sits on the "full" marker.

That's it! The old engine oil can be poured into the empty bottle which your new oil came in; and exist disposed of at whatever Supercheap Automobile store featuring an oil recycling bin. Give yourself a pat on the dorsum, and have a read through some more DIY manufactures for further inspiration.